Skip to content
Open calculators

Wall Tile Area Calculator

Calculate net wall tile area after openings, order area with waste, and edge trim length from wall measurements.

Inputs

Wall dimensions

Range: 0.1–2,000 ft

Add the finished lengths of every wall that will receive tile.

Range: 0.1–30 ft

Floor to ceiling for full height, or floor to the top of a wainscot.

Range: 0–100,000 optional

A wall measured separately that is not part of the run x height above (for example a knee wall or a second height). Enter 0 if everything is already in the run.

Openings and waste

Range: 0–100,000 ft2

Combined area of doors, windows and mirrors that will not receive tile.

Range: 0–30

Result

Net wall area
240.0
Order area (net + waste)
264.0
Calculation details
Gross wall area
240.0
Openings as a share of gross area
0.0 %
Top and bottom edge trim length
60.0
Extra area from waste allowance
24.0
OK

How this was calculated

Order area (net + waste)
—

Related calculators

Planning estimate only. Verify the entered measurements, product data sheet, site conditions, and applicable local requirements before ordering or installing. This calculator does not establish product suitability or code compliance.